Arizona pavers take a beating. Blistering UV exposure fades colors, monsoon rains wash out joint sand, weeds exploit every gap, and hard water leaves white deposits across the surface. But here is the good news: a properly restored paver surface looks brand new and can last another 20 years.
Common Paver Problems in Arizona
- Color fading from intense UV exposure (especially reds and browns)
- Joint sand washout from monsoon rain and irrigation overspray
- Weed and grass growth between pavers where sand has washed away
- Efflorescence (white mineral deposits) from hard water and ground moisture
- Shifting and settling from soil movement and poor original base prep
- Staining from tree sap, oil drips, rust, and organic debris
The Professional Paver Restoration Process
Step 1: Weed Removal and Surface Prep
All weeds, moss, and organic growth are removed mechanically and chemically. Old, deteriorated joint sand is extracted to allow proper cleaning and re-sanding.
Step 2: Deep Pressure Cleaning
Professional surface cleaning at controlled pressure removes embedded dirt, efflorescence, stains, and oxidized surface material without damaging the paver surface. This step alone dramatically improves appearance.
Step 3: Joint Sand Replacement
Fresh polymeric sand is swept into all joints and activated with water. Polymeric sand hardens when wet, resisting washout and preventing weed growth. This is critical in Arizona where monsoon rains regularly wash out conventional sand.
Step 4: Sealing for UV and Stain Protection
High-quality paver sealer restores color depth, provides UV protection to slow fading, creates stain resistance, and locks polymeric sand in place. Choose between natural-look and wet-look finishes based on your preference.
Timing matters in Arizona. Schedule paver sealing for fall or spring when temperatures are between 50-90 degrees and there is no rain forecast for 24 hours. Summer heat can cause sealer to flash-dry before it penetrates properly.